August 10, 2017
A customer recently asked the following question: Can you tell me if strain gages can be installed on anodized surfaces using M-Bond 200?  I’m concerned about aluminum anodized and...
August 8, 2017
1.  通过应变片测试法来得到齿根部位的弯曲应力。 2.  使用通用型小尺寸的应变片。 3.  Micro-Measurements 的防护涂层M-Coat A提供优异的防潮和防化学侵蚀性能。 当然布点方式也很有技巧性。直齿轮齿根承受一个水平面弯曲正应力和垂直切应力,两个应力都垂直与齿向;而斜齿轮齿根除承受与直齿轮相同方向的两个应力外,...
August 3, 2017
A customer recently asked the following question: We are using the M-Bond 610, and following your guidelines for this adhesive.  The strain gages that we’ve bonded appear to work well,...
August 1, 2017
A half-bridge in the form of a 0-90 degree Tee rosette can be used for a uniaxial strain measurement with excellent temperature compensation, but only under specific conditions.  These...
July 18, 2017
Darryl Peterson and Matt Saas discuss the material property and measurement situations that influence the decision as to the use of planar or stacked strain gage rosettes.
July 13, 2017
Jim Johnson provides information that is crucial to successful soldering on strain gages.
June 22, 2017
There is noise in my data that is affecting the strain rate value.  What can I do to minimize this type of noise?    First, I would make sure that there are absolutely no...
June 13, 2017
Darryl Peterson discusses the process of selecting the correct strain gage for an application.
June 8, 2017
Bob Watson discusses the problem of strain measurement in intense magnetic fields, and the solution in Micro-Measurements H-Series strain gages.  H-Series strain gages are designed to cancel...
June 1, 2017
Jim Johnson discusses the effects of silicone contamination and how to avoid this particular contaminant, which is difficult to remove.